FujiFilm VisualSonics Vevo F2 User Manual page 287

Counter Loop
A Counter Loop block can contain other blocks, and repeats those blocks a set number of times.
For example, if a Tx/Rx Event is inside a Counter Loop, and the Counter Loop is set to repeat 5 times, the
pulse sequence will run that Tx/Rx event 5 times.
Note: Loops can be nested within each other.
Interface
When a Counter Loop is selected in the Pulse Sequences menu, the following list of details appear:
The Pulse Sequences menu when a Counter Loop is selected
A Counter Loop has two configurable settings:
Loop Name
l
Counter
l
To edit a setting, tap the related field and make any necessary changes.
Loop Name
The name of the loop, as it appears on the pulse sequence.
Modes
Vevo F2 Imaging System User Manual
287