FujiFilm VisualSonics Vevo F2 User Manual page 77

6. (Optional) You can edit any point on the measurement by tapping and dragging the point anywhere
on the image.
7. (Optional) To move the entire measurement to another location while maintaining the area, tap and
drag the center point of the area.
8. Lift your finger after you have completed your edits. Tap anywhere outside of the measurement area
to commit the measurement.
Subsequent PA Region measurements placed on the image will b e colored differently by the system.
9. Once the PA Region is placed, the measurement parameters are updated on the Measurement
panel. Refer to Using the Measurements Panel on page 62.
Session Tasks
Vevo F2 Imaging System User Manual
77