FujiFilm VisualSonics Vevo F2 User Manual page 306

Note: The LAZR-X laser cart must be initialized before running any sequence that
uses it.
Interface
When this block is selected, the following interface appears:
The Pulse Sequences menu when a Set Wavelength block is selected
The Set Wavelength Relative check box determines if the wavelength is set directly, or if it is
l
adjusted from its current wavelength. The text of the text field changes accordingly.
The Set To/Change By text field contains the new wavelength, or the amount to adjust.
l
Infusion Pump
A Infusion Pump block starts or stops an infusion using the Vevo Infusion Pump accessory.
Note: The infusion pump uses all current settings that it was assigned.
Modes
Vevo F2 Imaging System User Manual
306