FujiFilm VisualSonics Vevo F2 User Manual page 66

center anchor point, then drag the measurement line.
3. When the move is complete, lift your finger and tap anywhere outside of the measurement area to
commit the measurement.
Angle
The angle measurement is available in B-Mode and PA-Mode., Color Doppler Mode, Power Doppler Mode,
Nonlinear Contrast Mode, and EKV.
To Add an Angle Measurement
1. Tap Measurements.
2. Tap Angle.
The measurement is placed on the image.
3. You can select any of the 3 anchor points for editing. Tap and drag an anchor anywhere on the
image.
As you move the anchor points, the parameters are updated on the Measurements panel. See Using
the Measurements Panel on page 62.
Session Tasks
Vevo F2 Imaging System User Manual
66