FujiFilm VisualSonics Vevo F2 User Manual page 328

6. Tap Done to create the series in the selected study. The system starts acquiring image data in B-
Mode.
To Add a New Series to an Existing Study while Imaging
1. In the General controls, tap New Series. The New Series window appears.
2. If the New Series button is not on the control panel, open the More Controls panel and go to the
General tab. See Customizing the Control Panel on page 91.
3. Enter the series parameters as required or copy the information from the previous series, as outlined
above.
4. Tap Done to create the series in the selected study. The system starts acquiring image data in B-
Mode.
To Simplify the Addition of Subsequent Series in a Study
1. In the Study Browser, select a study or series, tap New.
2. Tap New Series. The New Series window appears.
3. Tap the Previous Information button. The system copies the series information for nearly all the
fields from the previous series in the study (Series Name and Acquired By information is not copied).
Note: When copying previous series information, you can choose from up to 5 of
the previous series in the same study.
Study Browser
Vevo F2 Imaging System User Manual
328