FujiFilm VisualSonics Vevo F2 User Manual page 176

a. Tap a custom wavelength.
A delete icon appears under the selected wavelength.
b. Tap the delete icon.
4. When all settings are complete, tap Start Scan (if in staging mode) or Done (if scanning).
PA-Mode Controls
This section contains a list of controls that appear on the PA-Mode tab of the More Controls menu.
Any control listed here can be added to, or removed from, the right sidebar of the control panel during an
imaging session. For more information, refer to Customizing the Control Panel on page 91.
Note: Some controls are only available when specific PA-Mode sub-modes are
selected (such as Single or Spectro), or before tapping the Start button.
Modes
Vevo F2 Imaging System User Manual
176