FujiFilm VisualSonics Vevo F2 User Manual page 68

3. Tap and drag the active anchor to the desired location on the image. When you have placed the
anchor in the desired starting position, tap Set.
4. Tap and drag the handle to draw the measurement within the image area.
5. When you are finished drawing your measurement, lift your finger from the control panel and tap
Done.
6. (Optional) Tap and drag the line of the area to move the entire measurement while maintaining the
area.
7. The measurement and image are automatically saved after the measurement is moved.
Session Tasks
Vevo F2 Imaging System User Manual
68