FujiFilm VisualSonics Vevo F2 User Manual page 296

Add a Waveform
1. Tap the Add button (
2. In the menu that appears, select a waveform.
The top section of this flyout lists waveform profiles. This is identical to the list to the left of the
Waveforms panel.
The bottom section of this flyout is a preview that shows the selected waveform profile.
Note:
To select a waveform profile:
a. Select a waveform profile from the list.
b. Tap outside the flyout to close it.
Modes
).
The preview cannot be used to edit the waveform profile.
Vevo F2 Imaging System User Manual
296