Common Tasks; Change Scanning Modes; Change Transducers Or Applications - FujiFilm VisualSonics Vevo F2 User Manual

Delete
Deletes the current image. You will be prompted with a confirmation message before the image is deleted.
Only available when viewing saved images.
Export
Exports the current image.
Slide to Scan
Used to resume live imaging. To use this control, slide the green arrow to the right.
Next/Previous Image
Used to switch to the next or previous image in the series.
Only available when viewing saved images.

Common Tasks

During an imaging session, the Image Display shows a live feed of the image, and the control panel shows
an interface specific to the currently selected mode.
You can do any of the following tasks at any time during an imaging session:
Change modes
l
Change transducers or applications
l
Adjust the image
l
Freeze the image or resume scanning
l
Insert markup into the image
l
The following markup types are available:
Annotations
o
Measurements
o
Change the controls shown on the control panel
l
Save an image or clip
l
Change Scanning Modes
To change scanning modes, tap the appropriate mode button on the control panel.
For a full list of available modes and descriptions, refer to Modes on page 108.
Change Transducers or Applications
To change transducers, refer to Connecting and Disconnecting Transducers.
To change transducer applications, refer to Selecting a Transducer or Application on page 45.
For more information about transducer applications, refer to Manage Applications on page 367.
Session Tasks
Vevo F2 Imaging System User Manual
43