FujiFilm VisualSonics Vevo F2 User Manual page 406

WARNING:
WARNING:
and contact Technical Support. Refer to Contact and Legal Information on
page 477.
Power Supply
The Vevo F2 is powered by an XMS500 Series power supply manufactured by TDK-Lambda. This power
supply meets IEC 60601-1 medical electric safety standards for BF (Body Floating) use, which is the
classification of applied parts that includes ultrasound equipment.
The Vevo F2 is designed to operate according to the electrical specifications of the region to which the
system has been shipped.
A composite safety warning label located on the top of the system enclosure specifies the electrical
requirements of the Vevo F2. For more information, refer to Label Information on page 457.
Fuses
To protect the system from overcurrent damage, the power module of the Vevo F2 is protected by a series
of replaceable fuses. If a fuse blows, it must be replaced by a FUJIFILM VisualSonics service technician.
Note: For fuse specifications, refer to Fuse Specifications on page 453.
System Connectors
The Vevo F2 features the following connectors:
Components
Do not move the system when the power is plugged in.
If you cannot power on the system, unplug the machine immediately
Vevo F2 Imaging System User Manual
406