FujiFilm VisualSonics Vevo F2 User Manual page 424

The transducer connects to the laser cart via the Vevo Optical Fiber, which is a fiber optic cable. One end of
this cable ends in a ferrule, which connects to one of two laser ports on the laser cart. The other end of the
cable ends in a connector that is connected to the Vevo Fiber Jacket on the transducer.
Note: You can switch transducers at any time during an imaging session. The
Vevo LAZR-X laser cart software allows users to switch transducers without
negatively affecting the current scan or study.
Caution: If a transducer shows signs of damage, stop using it immediately and
contact Technical Support. For details, refer to Contact and Legal Information on
page 477.
Transducer interfaces
Components
Vevo F2 Imaging System User Manual
Transducer with cable and connector
424