FujiFilm VisualSonics Vevo F2 User Manual page 88

10. You can also copy a measurement. Refer to .
Copying and Pasting Contrast Region Measurements
When copying and pasting Contrast Regions, please keep the following in mind:
You can copy a Contrast Region measurement from a Nonlinear Contrast Mode image and paste it
l
to a Nonlinear Contrast Mode image or PA-Mode image.
Pasting a measurement on the destination image will only be allowed if the image area is large
l
enough to fit the copied measurement.
Copying and pasting a measurement is only available while reviewing an image in the 2D view.
l
A total of 5 Contrast Regions are allowed on one image.
l
To Copy a Single Contrast Region Measurement
1. Tap the Contrast Region measurement you wish to copy.
2. Tap the copy button.
3. Acquire a new image, load an image into review or use the currently loaded image.
4. Tap Paste Regions.
5. The copied Contrast Region measurement is placed on the image, with its original coordinates.
Session Tasks
Vevo F2 Imaging System User Manual
88