FujiFilm VisualSonics Vevo F2 User Manual page 192

Vevo F2 Imaging System User Manual
Once calibration begins, a progress bar appears.
When the laser calibration is complete, the following message appears:
Laser Issue Notification
On the control panel, the color of the laser tab will change from blue to yellow if an error or issue is detected
with the laser.
If the laser tab turns yellow, tap it to open a message box that describes the issue.
If laser optimization is required, refer to Contact and Legal Information on page 477 and contact FUJIFILM
VisualSonics technical support.
Modes 192