Document Conventions - FujiFilm VisualSonics Vevo F2 User Manual

PW Doppler Mode
o
While both the Vevo F2 and Vevo F2 LT use the same set of transducers, only cardiac applications
l
are available on the Vevo F2 LT.
Data from the Vevo F2 LT can be analyzed in Vevo LAB, but is not compatible with Vevo Vasc or
l
Vevo Strain.
Several features are not available on the Vevo F2 LT, so their corresponding interface options are
l
not available. All feature differences are listed in the table below:
Feature Difference
RF-Mode is not
available.
The foot pedal is not
supported.
Display options cannot
be configured.
PA-Mode is not
available.
VADA Mode is not
available.
Vevo Voice is not
available.
Frame Markers are not
available.

Document Conventions

Note boxes appear throughout this document to highlight key pieces of information.
WARNING:
Caution: Warns of issues that may cause data loss or equipment damage.
Note: Highlights important information.
Introduction
Corresponding Interface Difference
In the System Settings > Export menu, the export option for RF Data is not
available. Only the RAW option is available.
In the System Settings > General menu, the Foot Pedal Configuration
section is not available.
In the System Settings > General menu, the Display Options section is not
available.
In the System Settings menu, the Photoacoustics tab is not available.
In the System Settings menu, the VADA tab is not available.
In the System Settings menu, the Vevo Voice tab is not available.
The Add Frame Marker button is not available.
Warns of issues that may result in injury or death.
Vevo F2 Imaging System User Manual
17