FujiFilm VisualSonics Vevo F2 User Manual page 151

2. Make any adjustments to the box as necessary:
To reposition the box, tap and drag it to a new location.
o
To resize the box, tap and drag the handles at the bottom-left or bottom-right corners of the
o
box.
3. To change the beam steering, tap Beam Steering and select a new angle.
4. To adjust the Color Doppler Mode gain, use the gain slider.
5. Adjust any other controls as needed. For more information, refer to Color Doppler and Power
Doppler Controls on the next page.
6. To save the image, tap Save Clip or Save Frame.
Note: For more information about saving images, refer to Saving Images on
page 98
7. Tap Power again to return to B-Mode, or tap Freeze to stop scanning.
Power Doppler Mode Image Acquisition Workflow
To acquire an image in Power Doppler Mode:
1. Start an imaging session, then tap Power.
The Power Doppler Mode box appears on the control panel.
2. Make any adjustments to the box as necessary:
Modes
Vevo F2 Imaging System User Manual
151