Connect An Alarm System; Connection Of External Devices To The Switching Relays - Auerswald COMpact 4410 USB Installation And Configuration Manual

Isdn pbx systems

Hide thumbs Also See for COMpact 4410 USB:

Operator's manual (76 pages)

Table Of Contents

Table of Contents

If you do not need all the door key inputs for the door ringing, you are

able to use the door key inputs as alarm inputs. In order to obtain one

alarm input, the door key input has to be reconfigured with the configu-

ration program COMset.

An alarm input can be connected to an alarm indicator output like in

Pic.

33. You will get more details in the

page

10.

In the default factory settings the available relays are configured for

door functions. Changes are possible with COMset. Which configura-

tion options for the relays are available with the PBX or which operation

Relay no.

Operation Mode: Door Function

1/4

Talking to the door when picking up the receiver

2/5

Door opening for 1-99 sec after dialling a number during a door talk

3/6

Simultaneous switching on e.g. floor light for 1-99 min.

Relay no.

Operation Mode: Alarm Function

Switching on e.g. a siren for 1-99 sec when activating the alarm contact

1/4 and 3/6

2/5

Switching on e.g. a signal light for 1-99 min. when activating the alarm contact

Relay no.

Operation Mode: Music Function

1/4, 2/5 and 3/6

Switching on e.g. a CD player for 1-99 min. as soon as the Music on Hold is needed (during transfer, Query etc.

Relay no.

Operation mode: Universal switching Relay

1/4, 2/5 and 3/6

Switching on e.g. a fax machine (different switching options on):

1st Switched on during the 1st to 6th PBX configuration (during day, night, at noon etc.)

2nd Remote switching from an internal telephone

3rd Remote switching from an external telephone

4th Switch on for 1-99 min. as soon as a defined internal subscriber of the PBX is called (PC relay)

Relay no.

Operation mode: Announcement Function

1/4, 2/5 and 3/6

Switching on of e.g. a loudspeaker when the announcement output (audio output) is called.

The relays no. 1/4 offer the make contact each, the relays no. 2/5 a

make contact with protection circuit (100 nF, 220

3/6 offer a make and break contact.

The COMpact TS Module offers no supply voltage on the clamps that

means the supply of the connected units has to be made by an external

voltage.

Pay attention to the maximum rating of the relay contacts (30 V AC/1 A)

that are absolutely not suited for mains-operated devices. Due to this

fact an interconnecting of a mains relay is necessary.