Automatic Recall - K-Ccis - NEC Univerge SV9100 Manual

F
EATURE
This feature allows a call to be release transferred to another station in another office
in the K-CCIS network and recall back to the originator of the transfer after a
programmed time.
S
YSTEM
All Terminals
Required Components:
GCD-CCTA
GPZ-IPLE
O
PERATING
Using a multiline terminal with a call in progress (Closed Numbering Plan):
1.
2.
3.
4.
1.
2.
Using a multiline terminal with a call in progress (Open Numbering Plan):
1.
2.
3.
4.
5.
4-6
D
ESCRIPTION
A
VAILABILITY
- OR -
P
ROCEDURES
Press Transfer. Internal dial tone is heard. The call is placed on Non-Exclusive Hold.
Dial the distant K-CCIS station number where the call is to be transferred.
Wait for the ringback tone.
Hang up.
- OR -
When the party answers, announce the transfer.
Restore the handset (transfer is completed).
Press Transfer, and receive internal dial tone. The call is placed on Non-Exclusive
Hold.
Dial the trunk Access Code (normally 8).
Dial the Office Code number.
Dial the distant K-CCIS station number where the call is to be transferred.
Wait for the ringback tone.
Automatic Recall – K-CCIS
Features and Specifications
Issue 2.0