A-8D Automatic Recall - D Term - NEC NEAX2400 IPX Programming Manual

Feature programming manual
Hide thumbs Also See for NEAX2400 IPX:
Table of Contents

Advertisement

A-8D
General Description
This feature works as a timed reminder. When a D
or NON-EXCLUSIVE HOLD [N-7D]) or during an unattended transfer for a variable, programmable period of
term
time, the D
is automatically alerted.
Operating Procedure
No manual operation is required.
Service Conditions
1.
AUTOMATIC RECALL - D
PARAMETERS
term
2.
If the D
reenters a held or transferred call, timing is reset when the call is returned to a RECALL
position.
3.
When a held call returns to the D
flashing at 240 IPM occurs until the call is retrieved. The upper LCD goes blank during recall. The signal
occurs whether the D
4.
When an unattended transfer returns to the originator of the transfer, the D
seconds (VARIABLE TIMING PARAMETERS [V-1]), if the release signal is not provided from the
distant end. The LCD displays:
Note:
When the telephone number of the transferred/transferring station exceeds 8 digits, the last 8 digits are
displayed. However, a maximum of 16 digits transferring telephone number can be displayed on the middle
line of LCD depending on the system data.
term
5.
When a D
the AUTOMATIC RECALL - D
Programming
ASYD - System Data 1, Index 144. Recall timing of calls placed on EXCLUSIVE HOLD [E-4D] and
NON-EXCLUSIVE HOLD [N-7D]. For normal operation of 30 seconds, leave as data 00H. (RAM
data is 3FH)
System Data 1, Index 140. Recall timing of station transfers.
System Data 2, Index 12, Bit 0 - Ringer for NON-EXCLUSIVE, Bit 1 - Ringer for EXCLUSIVE
0 = Required
1 = Not Required
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Automatic Recall - D
Automatic Recall - D
term
timing is default in system data at 30 seconds. See VARIABLE TIMING
[V-1]
for other selectable timing choices.
term
, a continuous ring of 0.5 seconds ON, 0.5 seconds OFF, and an LED
term
is on-hook or off-hook.
RECALL
(Time Display)
holds a call by NON-EXCLUSIVE HOLD [N-7D] during a THREE-WAY CALL [T-2D],
term
feature cannot be activated.
term
term
handled call remains on hold (EXCLUSIVE HOLD [E-4D]
Transferred
Transferring
Station
Station/Trunk
XXXX
XXXX
term
term
will ring normally for 30
A-8D
Page 17

Advertisement

Table of Contents
loading

Table of Contents