Maximum Permitted Speeds With An Axle Load Of Over 12 T (26,500 Lbs) - Manitowoc Grove GMK4100L-1 Operating Manual

6.1.3
G
Operating manual
GMK4100L-1
Maximum permitted speeds with an axle load of over 12 t
(26,500 lbs)
Should your national regulations allow driving with axle loads over
12 t (26,500 lbs), you may under no circumstances exceed the maximum
permitted speed given here.
Risk of accidents from overloading tyres
Never exceed the maximum permitted speed which is given for the current
axle load and tyre size.
This prevents the tyres from becoming overloaded and bursting.
The maximum permissible speed depends on the size of the tyres and the
axle load. The following values only apply to the given tyre pressure, and
are maximum values. Also note the information provided by the tyre
manufacturer regarding the maximum permitted load duration.
Tyre size/
Tyre pressure in bar (psi)
1)
385/95 R 25 / 10 (145.0)
445/95 R 25 / 9 (130.5)
525/80 R 25 / 7 (101.5)
1)
Michelin X-Crane 9 bar (130.5 psi)
Current
Axle load in t
(lbs)
Up to 13.5
(29,800)
Up to 14.5
(32,000)
Up to 15.5
(34,200)
Up to 16.5
(36,400)
Up to 13.5
(29,800)
Up to 14.5
(32,000)
Up to 15.5
(34,200)
Up to 16.5
(36,400)
3 302 690 en
Driving modes
6.1 Driving modes
Maximum permissible
speed
In km/h (mph)
58 (36)
45 (28)
32 (20)
22 (14)
65 (40)
65 (40)
65 (40)
58 (36)
6 - 7