Displaying The Operating Hours - Manitowoc Grove GMK4100L-1 Operating Manual

11.6.10
Operating manual
GMK4100L-1

Displaying the operating hours

You can view the total operating hours for all power units in the Operating
hours menu. You can also delete the recorded operating hours.
The total operating hours cannot be deleted.
•
Open the Operating hours (1) menu.
11.6 Settings and displays for crane operation
Displays
The operating hours are recorded as follows:
– The value (1) indicates the total operating
hours, for example, 1,680 hours.
– The value (2) shows the operating hours,
which can be reset.
Exception: The value below the symbol (3)
indicates how often the cycle Unlock telescopic
section has been performed, for example,
13,750 times.
The value (4) shows the cycles; this can be
reset.
Reset
The displayed operating hours/cycles (3) can
be reset.
•
Select and confirm the symbols (1) one after
the other.
•
Confirm the entry with the symbol (2).
You can individually select power units
– display (3) or
– select all – symbol (4).
•
Reset the selected operating hours with
button (5) or (6).
3 302 690 en
Crane operation
11 - 133