Setting The Idling Speed - Manitowoc Grove GMK4100L-1 Operating Manual

4.1.10
H
Operating manual
GMK4100L-1

Setting the idling speed

After the engine is started, the idling speed is regulated automatically.
If necessary, you can adjust the idling speed manually.
You can only set the idling speed when the truck crane is stationary.
Starting the engine for driving / switching it off
4.1 Starting the engine from the driver's cab
Increasing/reducing the idling speed
•
Press the button (1) repeatedly until Engine
speed is shown in the on-board computer
display.
•
Increase or decrease the speed stepwise
using the buttons (2) or (3). The engine
speed is increased/reduced by 20 rpm.
After about 3 seconds the setting is
automatically saved.
Switching off the idling speed change
•
Press the button (1) repeatedly until Engine
speed is shown in the on-board computer
display.
•
Press the button (3).
or
•
Press the button (2).
or
•
Accelerate to more than 20 km/h (12 mph).
3 302 690 en 4 - 17