Disconnecting/Establishing The Electrical Connection - Manitowoc Grove GMK4100L-1 Operating Manual

6.5.8
S
H
Operating manual
GMK4100L-1

Disconnecting/establishing the electrical connection

The electrical connection is only present on truck cranes equipped with an
outrigger pressure display or outrigger span monitoring system.
Risk of malfunctions in the electronic system!
Always turn off the ignition before you disconnect or establish the electrical
connection. This prevents malfunctions and corresponding error messages
in the subsequent crane operation.
Some error messages can occur after disconnecting the electrical connec-
à
Note on error messages with removed outrigger beams , p. 6 - 47.
tions;
6.5 Installing/removing the outrigger beams
(A) – Disconnecting the connection
•
Pull the plugs (1) apart. Protect the plugs
against dirt and moisture.
(B) – Establishing the connection
•
Connect the plugs (1) together.
•
Protect the separating points against dirt
and moisture.
3 302 690 en
Driving modes
6 - 39