Manitowoc Grove GMK4100L-1 Operating Manual page 880

Rigging work
12.11 Other rigging work
12 - 134
Removing
– Only the camera
•
Withdraw the plug (4) from the socket (3)
and close it with the cap.
•
Remove the camera (2) from the clamp (1)
and put the retaining pin in the holder (1).
•
Wind the cable (5) on to the clamp.
– The camera and the connecting cable
•
Withdraw the plug (3) from the socket (4)
and close it with the cap.
•
Remove the camera (2) from the clamp (1)
and put the retaining pin in the holder (1).
•
Wind the cable (5) on to the clamp.
3 302 690 en Operating manual
GMK4100L-1