Manitowoc Grove GMK4100L-1 Operating Manual page 343

G
Operating manual
GMK4100L-1
Risk of being crushed by the swinging outrigger beam!
Secure the outrigger beam with the guide ropes as it is lifted out of the
outrigger box.
Keep a suitable distance to avoid injuring yourself or others on the
swinging outrigger beam.
•
Fasten the connecting elements to the connecting points (1) of the
supports.
6.5 Installing/removing the outrigger beams
•
Fasten the lifting gear (1) and a chain hoist.
•
Pull the outrigger beam out so far that the
centre of gravity (2) is accessible;
of gravity data , p. 6 - 34.
•
Using the auxiliary crane, sling the outrigger
beam in the centre of gravity (2).
•
Remove the chain hoist and lifting gear.
Fasten a guide rope (1).
•
Lift the outrigger beam slightly to ease the
load.
•
Lift the outrigger beam almost completely
out of the outrigger box.
•
Fasten another guide rope (1).
•
Lift the outrigger beam out of the outrigger
box.
•
Lift the outrigger beam onto a separate
à
vehicle;
3 302 690 en
Driving modes
p. 6 - 46.
à
Centre
s
6 - 43