Displaying The Lifting Capacity Tables - Manitowoc Grove GMK4100L-1 Operating Manual

11.4.9
Slewing range
type Standard
Operating manual
GMK4100L-1

Displaying the lifting capacity tables

Open menu
•
Open the lifting capacity table menu (1) on the CCS control unit.
Exiting the menu
•
Press the button (1) or press the button (2) on the CCS control unit once –
the Start menu opens.
If the MAXbase slewing range type has been entered;
11.4 Operation of the rated capacity limiter
Permissible working range display
The curve (3) applies to the displayed RCL
code and the displayed telescope status.
I Lifting capacity axis – in tons (t) or in kilo-
pounds (klbs)
II Working radius axis – in metres (m) or
feet (ft)
The working range ends at the maximum pos-
sible working radius (2). Reduction of the
working radius increases the enabled load
along the curve (3) up to the maximum possi-
ble load (1).
3 302 690 en
Crane operation
à
p. 11 - 61.
s
11 - 59