Operating The Level Adjustment System - Manitowoc Grove GMK4100L-1 Operating Manual

5.4.3
Open menu
Operating manual
GMK4100L-1

Operating the level adjustment system

You can use the level adjustment system to set the on-road driving level,
change the overall level and incline the truck crane.
You can only open the Level adjustment system menu when the current speed
is less than about 5 km/h (3 mph).
•
Open the Suspension/level adjustment (1) menu.
•
Check that the symbol (1) is green (suspen-
sion on).
•
If the symbol (1) is red then select and
confirm the symbol (2) to switch the
suspension on.
When the suspension has been switched on,
you can:
– Set the on-road driving level
– Pre-select the suspension struts and change
the vehicle level.
If the symbol (3) is shown for an error during a
level adjustment, refer to
3 302 690 en
Driving
5.4 Off-road driving
Manitowoc Crane Care
s
5 - 53
.