Manitowoc Grove GMK4100L-1 Operating Manual page 881

Camera on
the hoists
G
Camera on the
driver's cab
Operating manual
GMK4100L-1
This section describes the CCS display as the monitor. Depending on the
version, a separate monitor may also be present.
Risk of accidents due to exceeding the permissible dimensions!
Always retract the camera before driving. When the camera is extended,
the overall height specified for on-road driving is exceeded.
A camera (1) transmits an image of the main
and auxiliary hoists to the display in the crane
cab.
(A) – For crane operation you must extend the
camera – symbol (3).
(B) – For crane operation you must retract the
camera – symbol (2).
A camera (1) allows viewing of the non-visible
area in front of the driver's cab.
Depending on the version, the camera image
is shown on the CCS display or on a separate
monitor.
•
Adjust the camera (1) to show the area (2)
in front of the bumper on the display or
monitor.
3 302 690 en
Rigging work
12.11 Other rigging work
s
12 - 135