Setting Idling Speed - Manitowoc Grove GMK6300L Operating Manual

Starting the engine for driving / switching it off
4.1 Starting the engine from the driver's cab
4.1.13
H
4 - 22

Setting idling speed

After the engine is started, the idling speed is regulated automatically.
If necessary, you can adjust the idling speed manually using the multipur-
pose switch.
You can only set the idling speed when the truck crane is stationary.
Increasing/reducing the idling speed
•
Press the switch (2) up/down until the required engine speed (1) has been
reached.
or
•
Press the switch (2) up/down once. The engine speed (1) is increased/
reduced by 20 rpm.
Switching off the idling speed change:
•
Push the switch forwards once. The idling speed is set automatically.
or
•
Accelerate to more than 20 km/h (12 mph).
3 112 xxx en Operating Manual GMK6300L