Dell C9000 Series Reference Manual page 204

From a PE console, use copy flash: [source-filename destination-
filename] | usbflash: [source-filename destination-filename]
Parameters
Enter the following location keywords and information:
compressed-
config
file-name
Enter the keyword compressed-config to copy one file, after
optimizing and reducing the size of the configuration file, to
another location. Dell Networking OS supports IPv4 and IPv6
addressing for FTP, TFTP, and SCP (in the hostip field).
To copy a file enter flash:// and then the filename
from the internal
FLASH
To copy a file on enter ftp://
an FTP server
user:password@hostip/filepath
To copy a file on enter http: http://hostip/
an HTTP server
filepath
To copy a file on enter nfsmount://<mount-point/
a NFS-mounted
filepath
system
To copy the enter the keyword running-config
running
configuration
To copy the enter the keyword startup-config
startup
configuration
To copy using a enter the keyword scp:
Secure Copy
(SCP),
To copy a file on enter tftp://hostip/filepath
a TFTP server
NOTE: While switching to a
remote NFS file system, it is
mandatory to specify the
mount-point that indicates the
working directory on the NFS
file system. You cannot enter
the root directory of the remote
NFS file system.
• If you enter scp: in the source
position, enter the target URL;
• If you enter scp: in the target
position, first enter the source URL;
File Management 204