Connection Methods; Connecting The Primary Power Supply - YASKAWA NX100 Instructions Manual

4.3 Connection Methods

4.3
Connection Methods
A connection diagram for the manipulator, manipulator cable, primary power cable and pro-
gramming pendant is shown below.
Primary power supply cable
Manipulator
NX100
Programming pendant cable
Manipulator cable
4.3.1

Connecting the Primary Power Supply

1. Open the front door of the NX100.
(1) Insert the door lock in the door lock on the front of NX100 (two places), and rotate it
90 degrees clockwise.
door lock
clockwise
90
( - )screw driver
Rotating the Door Lock Clockwise.
4-6