Configuring By Port List - Huawei Quidway S1700 Series Web User Manual

Quidway S1700 Series Ethernet Switches
Web User Manual
Table 4-1 Parameters of Displaying Port Information
Title
Port
Type
Name
Admin
Oper Status
Media Type
Autonegotiation
Oper
Duplex
Oper Flow Control
To display port connection parameters:
1. Click Interface > Port > General.
2. Select Show Information from the Action List.
----End

Configuring by Port List

Use the Interface > Port > General (Configure by Port List) page to enable/disable an
interface, set auto-negotiation and the interface capabilities to advertise, or manually fix the
speed, duplex mode, and flow control.
Figure 4-2 Configuring Connections by Port List
Issue 01 (2011-11-17)
Description
Port identifier.
Indicates the port type. (1000Base-T, 1000Base SFP)
Interface label.
Shows if the port is enabled or disabled.
Indicates if the link is Up or Down.
Media type used.
(Options: RJ-45 – Copper-Forced; SFP-Forced,; Default: RJ-45 –
Copper-Forced)
Shows if auto-negotiation is enabled or disabled.
Speed Shows the current speed and duplex mode.
Shows if flow control is enabled or disabled.
Figure 4-1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
is displayed.
4 Interface Configuration
25