Example For Configuring A Single Rrpp Ring With Multiple Instances - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
l
3.6.4 Example for Configuring a Single RRPP Ring with Multiple
Instances
Networking Requirements
As shown in
ring.
Two rings are involved in the networking, ring 1 in domain 1 and ring 1 in domain 2.
VLANs 100 to 300 are configured on CE. Domain 1 and domain 2 share the traffic of packets
from VLANs 100 to 300. Packets from VLANs 100 to 200 are transmitted through domain 1,
and packets from VLANs 201 to 300 are transmitted through domain 2.
Table 3-1
2.
Issue 01 (2011-10-26)
port hybrid tagged vlan 10 to 11
stp disable
#
interface Ethernet0/0/2
port hybrid tagged vlan 10 to 11
stp disable
#
return
Configuration file of Switch E
#
sysname SwitchE
#
vlan batch 10 to 11
#
rrpp enable
#
stp region-
configuration
instance 1 vlan 10 to
11
active region-configuration
#
rrpp domain 1
control-vlan 10
protected-vlan reference-instance 1
timer hello-timer 2 fail-timer 7
ring 1 node-mode master primary-port Ethernet 0/0/1 secondary-port Ethernet
0/0/2 level 0
ring 1 enable
#
interface Ethernet 0/0/1
port hybrid tagged vlan 10 to 11
stp disable
#
interface Ethernet 0/0/2
port hybrid tagged vlan 10 to 11
stp disable
#
return
Figure 3-8, UPE A, UPE B, UPE C, and PE-AGG form a multi-instance RRPP
shows the mapping between protected VLANs and instances in domain 1 and domain
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
97