Rep 12.3-171 Top Tray - Xerox ColorQube 9303 Series Service Manual

REP 12.3-171 Top Tray

Parts List on PL 12.100.
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. If fitted, undock the Inserter, REP 12.82-171.
2. Remove the top and rear covers REP
3. Prepare to remove the top tray, Figure
1
Lift the tray and release
the link eyes from the
lugs on the tray.
Figure 1 Preparation
Repairs/Adjustments
REP 12.3-171
WARNING
GP 14. Disconnect the power cord
WARNING
12.1-171.
1.
2
Remove the pin
and spring.
4. Remove the top tray, Figure
5
Remove top
the tray.
Replacement
The replacement procedure is the reverse of the removal procedure.
February 2013
4-128
2.
4
Remove the E-
clip and bearing.
1
Remove the E-clip
and outer pulley.
Figure 2 Top tray removal
ColorQube® 9303 Family
3
Remove the
E-clip and
bearing.
2
Remove the
inner belt idler
puller and inner
pulley.