Rep 5.12 Size Sensors 1/2 (Rear/Front); Rep 5.13 Dadf Belt Motor Assembly - Xerox DocuColor 2240 Service Manual

REP 5.12 Size Sensors 1/2 (Rear/Front)

Parts List on PL 20.5
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Open the DADF Top Cover.
2. Remove the DADF Front Cover (PL
3. Remove the Entrance Tray (PL 20.1).
4. Remove Lower Chute Assembly (REP
5. Remove Set Gate Solenoid Assembly
6. Remove Size Sensors 1/2 (Figure
1
Remove
screws (2)
2
Disconnect connectors
Figure 1 Removing Size Sensors 1/2
Initial issue
DC 3535/2240/1632
WARNING
20.1).
5.8).
(REP 5.10).
1).
3
Remove screws (2) and
sensors

REP 5.13 DADF Belt Motor Assembly

Parts List on PL 20.6
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Remove Rear Cover (REP 5.18).
2. Remove DADF Belt Motor Assembly
1
Mark position of motor bracket on frame
near all four mounting screws
2
Disconnect
connector
3
Loosen
screws (4)
Figure 1 Removing DADF Belt Motor Assembly
Replacement
Align motor bracket with marks on frame before tightening screws.
02/03
4-31
WARNING
(Figure 1).
Repairs and Adjustments
REP 5.12, REP 5.13
4
Remove
Belt from
motor pulley
and remove
motor