REP 15.2.2 DADF Feeder Assembly
Parts List on
PL 15.2
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1.
Remove the DADF.
(REP
15.1.1)
2.
Remove the following covers.
•
DADF Front Cover
(REP
15.2.3)
•
DADF Rear Cover
(REP
15.2.4)
3.
Open the Top Cover Assembly.
4.
Remove the DADF Document Tray.
5.
Disconnect the DADF PWB connectors.
1.
Disconnect the connectors (6).
Repairs and Adjustments
REP 15.2.2
WARNING
(REP
15.2.1)
(Figure
1)
Figure 1 Disconnecting the DADF PWB connectors
6.
Remove the lever and Wire Harness.
1.
Loosen the Set Screw and remove the disk.
2.
Release the hook and remove the lever.
3.
Remove the screw.
4.
Remove the washer.
5.
Move the DADF Interlock Switch.
6.
Disconnect the connector.
7.
Disconnect the connector.
8.
Remove the Wire Harness from the clamps (x3).
February, 2008
4-106
(Figure
2)
Launch Version
WorkCentre 5225, 5230