Ruijie Networks RG-S2600E Series Cli Reference Manual page 1040

S2600E CLI Reference Guide Chapter 6 GRTD Configuration Commands
*****
*Diagnostic test suite attributes:
M/C/*-Minimal bootup level test / Complete bootup level test / NA
P/V/*-Per port test / Per device test / NA
D/N/*-Disruptive test / Non-disruptive test / NA
X/*-Not a health monitoring test / NA
F/*-Fixed monitoring interval test / NA
E/*-Always enabled monitoring test / NA
A/I/*-Monitoring in active / Monitoring in inactive / NA
Y/O*-Key test / Non-key test / NA
R/*-Power-down line cards and need reload mainbord / NA
K/*-Require resetting the line card after the test completed /
NA
**************************************************************
*****
Thre-
ID Test Name
shold
== ==============================
====
1) OutbandSelfTest--------------->
NA
2) InbandSelfTest---------------->
NA
3) MacSelfTest------------------->
NA
4) TestCpld---------------------->
NA
5) TestPCI----------------------->
NA
6) TestNandFlash----------------->
NA
7) TestNorFlash------------------>
NA
8) TestI2C----------------------->
NA
9) TestDdr----------------------->
NA
10) InbandPingTest----------------> ***N********* 0
10
test interval
Attributes day hh:mm:ss
============= ============
M**DX******** not config
C**DX******** not config
***DX******** not config
C**DX****Y*** not config
C**DX******** not config
**PDX******** not config
**PDX******** not config
C**DX******** not config
***DX******** not config
00:00:10