Ruijie Networks RG-S2600E Series Cli Reference Manual page 1013

S2600E CLI Reference Guide
6.1.1 diagnostic bootup level
Use this command to set the bootup test level in global configuration mode:
bypass bootup test, minimal bootup test, and complete bootup test.
diagnostic bootup level {bypass | minimal | complete}
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Chapter 6 GRTD Configuration Commands
Parameter
bypass
minimal
complete
The default level is minimal.
Global configuration mode
Use the diagnostic bootup level command to set the bootup test
level.

Three levels of bootup test can be configured: bypass bootup
test, minimal bootup test, and complete bootup test.
The configured bootup test level takes effect
during the next reset process instead of taking
effect immediately after being configured.
Caution
Example 1: The following example sets the bootup test level as
complete bootup test:
diagnostic bootup level complete
ruijie(config)#
ruijie(config)#
Example 2: The following example recovers the bootup test level.
ruijie(config)#no diagnostic bootup level
ruijie(config)#
Field
complete
Description
Bypass bootup test
Minimal bootup test
Complete bootup test
Description
Complete bootup test