Ruijie Networks RG-S2600E Series Cli Reference Manual page 1052

S2600E CLI Reference Guide
7
7.1 Configuration Related Commands
7.1.1 action cli
In SEM configuration mode, use this command to configure the policy action
that executes the command line. The no form of this command deletes the
action with the specified label.
action label cli command cli-string [pattern pattern-string]
no action label
Parameter
description
Default
configuration
Command
mode
Usage
Guideline
Chapter 7 SEM Configuration Commands
SEM
Commands
Parameter
label
command
cli-string
pattern
pattern-string
By default, no action is configured.
SEM configuration mode
The policy executes command in the user mode, so the
first command executed is "enable" to enter the privilege
mode. No password is required from the user in action cli;
you will pass authentication directly.
Pattern-string contains multiple response messages
Configuration
Description
Label of the action.
Command to be executed.
(optional) Response pattern when the
command string solicits input.