Ruijie Networks RG-S2600E Series Cli Reference Manual page 1055

S2600E CLI Reference Guide
Related
commands
7.1.3 action exit
In SEM configuration mode, use this command to configure the policy action
that terminates the policy script and sets the exiting status . The no form of this
command deletes the action with the specified label.
action label exit [result]
no action label
Parameter
description
Default
configuration
Command
mode
Usage
Guideline
Examples
Chapter 7 SEM Configuration Commands
Ruijie(config-applet)#exit
Command Description
smart manager Define the command line based SEM
applet policy.
Parameter
label
result
By default, 0 is returned when the policy is executed to the
end.
SEM configuration mode
In the synchronization mode, the operation of triggering the
policy will wait for the completion of policy execution. And
the returned value of the policy will determine whether to
continue executing. If 0 is returned, stop running, while
other values continue running.
The returned value of the policy is specified by the action
exit and it is 0 by default.
The following example monitors the command line using
the synchronization mode, when user inputs the "write
memory" yes, it will prohibit the user operation and prompt
Description
Label of the action.
(optional) returned value of the Exit, it
is 0 by default.