Ruijie Networks RG-S2600E Series Cli Reference Manual page 1044

S2600E CLI Reference Guide
6.3.4 show diagnostic events
Use this command to display all event information generated by GRTD.
show diagnostic events [slot slot_id [sub_system subsys_id]]
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Chapter 6 GRTD Configuration Commands
Parameter Description
slot slot_id Slot ID
(Optional) Subsystem ID (value range: 0-1), whose
sub_system
meaning is equivalent to cpu id in the show version
subsys_id
command.
This command has no default setting.
Privileged mode
Use the show diagnostic events command to display all event
information generated by GRTD.
Example 1: Use the show diagnostic events command to display
the following:
ruijie#show diagnostic events
Diagnostic events (storage for 500 events, 3 events recorded)
Number of events matching above criteria = 3
Event Type (ET): I – Info, W – Warning, E – Error
Time Stamp ET [Slot] Event Message
------------------
----------------------------------
10/04 21:22:03.891 I [5]
10/04 21:22:43.583 I [3]
10/04 21:23:03.851 I [8]
ruijie#
Field
Time Stamp
--
Diagnostic Passed
Diagnostic Passed
Diagnostic Passed
Description
Test time
----