Ruijie Networks RG-S2600E Series Cli Reference Manual page 1061

S2600E CLI Reference Guide
Parameter
description
Default
configuration
Command
mode
Usage
Guideline
Examples
Related
commands
7.1.9 commit
Use this command to submit current policy configurations in SEM configuration
mode.
commit
Parameter
description
Chapter 7 SEM Configuration Commands
Parameter
label
wait-seconds
By default, no action is configured..
SEM configuration mode
N/A
Before executing the show arp command, execute the
clear arp-cache and wait for 5 seconds.
Ruijie(config)#smart manager applet Test_1
Ruijie(config-applet)#event tag monitor_cli cli pattern
"show arp" sync yes
Ruijie(config-applet)#action 00 cli command "enable"
Ruijie(config-applet)#action 10 wait 5
Ruijie(config-applet)#action 20 exit 1
Ruijie(config-applet)#commit
Ruijie(config-applet)#exit
Command Description
smart manager Define the command line based SEM
applet policy based on the.
Parameter
-
Description
Label of the action
Length of time to wait.
Description
-