Ruijie Networks RG-S2600E Series Cli Reference Manual page 1069

S2600E CLI Reference Guide
Default
configuration
Command
mode
Usage
Guideline
Examples
Chapter 7 SEM Configuration Commands
exit-val exit-value
By default, no event is configued.
SEM configuration mode.
The event counter command is used to monitor the named
counters in SEM, which are usually changed by the action
counter.
When the combinations between the command counter and
entry-op/entry-val are patterned successfully, an event is
triggered. Then, the current patterning stops, meaning the
event detection fails.
When triggered patterning stops, the combinations between
the command counter and exit-op/exit-val are patterned. If
the patterning succeeds, the combined patterning with
entry-op and entry-val recovers.
Available events:
Variable Name
_counter_name
_counter_value
The following example
Test_Counter. When the value of Test_Counter is larger
than 10, a log is generated and Test_Counter is set to 0.
When the value of Test_Counter is larger than 5,
monitoring recovers.
Ruijie(config)#intelligence manager applet Test_1
Ruijie(config-applet)#event tag monitor_counter counter
name Test_Counter entry-op ge entry-val 10 exit-op gt
exit-val 5
Ruijie(config-applet)#action
lt less than
ne unequal to
The value that recover comparison.
Function
Indicates the name of the
named counter
Indicates the value of the
named counter
configures
10 counter
policy counter
name