Ruijie Networks RG-S2600E Series Cli Reference Manual page 1057

S2600E CLI Reference Guide
Default
configuration
Command
mode
Usage
Guideline
Examples
Related
commands
Chapter 7 SEM Configuration Commands
sub-system-id
type event-type
arg1
argument-data
arg2
argument-data
arg3
argument-data
arg4
argument-data
By default, no action is configured.
SEM configuration mode
This configuration is used with the event application. When
the policy running the action publish-event has generated
the message, the event application with the same
sub-system and type will be triggered.
The following example monitors the event published by the
action publish-event with the sub-system ID being 100 and
type ID being 50, record logs after being triggered.
Ruijie(config)#smart manager applet Test_1
Ruijie(config-applet)#event tag monitor_event none
Ruijie(config-applet)#action 00 publish-event sub-system
100 type 50 arg1 para_1
Ruijie(config-applet)#commit
Ruijie(config-applet)#exit
Command Description
Define the command line based SEM
smart manager
policy.
applet
event
application
Subtype of the published event.
(optional) parametr1 of the event.
(optional) parametr2 of the event.
(optional) parametr3 of the event.
(optional) parametr4 of the event.