Ruijie Networks RG-S2600E Series Cli Reference Manual page 1070

S2600E CLI Reference Guide
Related
commands
7.1.14 event interface
In SEM configuration mode, use this command to configure statistics on the
monitoring interface of a monitor. Use the no form of this command to delete
the event with the specified name.
event tag event-name [correlate {andnot | and | or}] interface name
interface-type interface-number parameter counter-name entry-op operator
entry-val entry-value entry-type {value | increment | rate} poll-interval
poll-int-value [exit-op operator exit-val exit-value exit-type {value | increment
| rate} [exit-comb {or | and}] [exit-time exit-time-value]] [average-factor
average-factor-value]
no event tag event-name
Parameter
description
Chapter 7 SEM Configuration Commands
Test_Counter op set value 0
Ruijie(config-applet)#commit
Ruijie(config-applet)#exit
Command Description
smart manager Define the command line based SEM
applet policy.
action counter -
Parameter
event-name
correlate { andnot |
and | or }
name interface-type
interface-number
parameter
counter-name
entry-op operator
Description
The event name.
The relation between the current
event and the combination of the
previous events in the case of
multiple events (optional).
values are and, or, and andnot.
The interface name.
The statistics type of the monitoring
interface.
The method that
comparison:
eq: equal to
ge: greater than or equal to
gt: greater than
le: less than or equal to
lt: less than
The
triggers