Action Reload - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E CLI Reference Guide
7.1.5

action reload

Use this command to reload the device in SEM configuration mode. The no
form of this command deletes the action with the specified label.
action label reload
no action label
Parameter
description
Default
configuration
Command
mode
Usage
Guideline
Examples
Related
commands
7.1.6 action set
Use this command to set the local variable of policy in SEM configuration mode.
The no form of this command deletes the action with the specified label.
action label set variable-name variable-value
no action label
Chapter 7 SEM Configuration Commands
Parameter
label
By default, no action is configured.
SEM configuration mode
N/A
The following example sets to reload the device when the
memory of entire device is less than 20M.
Ruijie(config)#smart manager applet Test_1
Ruijie(config-applet)#event tag monitor_memory sysmon
memory scope system-free entry-op lt entry-val 20000
Ruijie(config-applet)#action 00 reload
Ruijie(config-applet)#commit
Ruijie(config-applet)#exit
Command Description
Define the command line based SEM
smart manager
policy.
applet
Description
Label of the action.