Ruijie Networks RG-S2600E Series Cli Reference Manual page 1023

S2600E CLI Reference Guide
6.1.6 diagnostic monitor syslog
Use this command to set a system log message to be generated when any
monitoring test fails.
diagnostic monitor syslog
no diagnostic monitor syslog
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
commands
Chapter 6 GRTD Configuration Commands
Parameter Description
System log message
syslog
By default, a system log message is generated when any
monitoring test fails.
Global configuration mode
Use the diagnostic monitor syslog command to set a system log
message to be generated when any monitoring test fails.
Example 1: The following example sets a system log message to be
generated when any monitoring test fails.
ruijie(config)#
diagnostic monitor syslog
ruijie(config)#
Example 2: The following example sets no system log message to
be generated when any monitoring test fails.
ruijie(config)#
no diagnostic monitor syslog
ruijie(config)#
Field
syslog
Command
None
Description
System log message
Description