2-3. Controller PCB (including Recording data Generating PCB)
2-3-1. Role of Board
Main roles of the controller PCB are as follows.
•
Functions to generate image data.
•
Converts data supplied from a computer, scanner, or USB memory to image data and transfers it to the
recording data generating PCB.
•
Job management functions.
•
Manages jobs (print jobs from a computer or image data from a scanner).
•
Functions for transfer of image data.
•
Transfers expanded image data to the image processing PCB, based on job information.
•
Functions for controlling the operation panel unit.
•
Controls the operation panel unit.
•
Download functions.
•
In this system, all downloads to units that require them are done as follows: An update program stored
on a USB memory device is read after the device is inserted in the USB port managed by the controller
PCB, and a downloading application stored in memory on the controller PCB is executed to download
the data to the controller PCB, engine control PCB, scanner, or fi nisher.
•
System control functions.
•
For overall control of the system as a whole.
•
Scanner control functions.
•
Controls scanners connected as optional equipment.
•
User authentication functions.
•
Controls user authentication (optional).
•
Image adjustment (for details, refer to the chapter on image adjustment).
•
Functions to back up setting values of the engine control PCB.
•
The controller PCB unit backs up information to the hard disk, including mechanical settings values and
counter values saved by the engine control PCB.
[ 14-11 ]
Electronic Components
Rev.1.00