Option
4-28. Paper Stacking Tray Upper Limit Sensor removal
1. Remove the Rear Cover.
2. Tilt the Control Board (PCB).
3. Unplug the wire connector from the sensor.
4. Remove the Paper Stacker Tray Upper limit Sensor from the metal bracket.
4-29. Paper Stacking Tray Elevation Clock Sensor removal
1. Remove the Rear Cover.
2. Remove the Control Board (PCB).
3. Remove the Tray Elevation Motor..
4. Unplug total of 3 wire harness connectors.
5. Paper Stacking Tray Elevation Clock Sensor Assembly. (IT3C screw 4x8 (1 pc)).
6. Remove the Paper Stacking Tray Elevation Clock Sensor.
[ 19-67 ]
Paper Stacker Tray Upper Limit Sensor
Paper Stacking Tray Elevation Clock Sensor.
Tray Elevation Motor Assembly
[ 19-67 ]
Face Down Offset Stapler