Riso ComColor X1 series Technical Manual page 186

Paper Ejection Section
<< FD Paper Ejection Flipper Timing Chart >>
Paper Path Switching: Paper Transfer Action
Name
FD paper ejection flipper
1.
sensor
FD paper ejection flipper
2.
solenoid
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
5.
6.
1. Error
2. FD paper ejection flipper solenoid ON/OFF:
(1) ON: Value calculated based on timing of FD paper ejection flipper sensor ON
(2) OFF: Value calculated based on timing of FD paper ejection flipper sensor OFF
Note: ON/OFF timing varies depending on paper size.
ON "Not arrived"
error
OFF
ON
(1) ON
OFF
Value calculated based
on timing of detection of the
leading edge of sheets
Start
Transfer started
: Flipper sensor "Not arrived" error
: Flipper sensor "Still present" error
[ 9-6 ]
Timing
"Still present" error
(2) OFF
Value calculated based on
timing of detection of the
trailing edge of sheets
ComColor Series (Revision 2.4)
Finish
Transfer ended