Riso ComColor X1 series Technical Manual page 596

Data Editing (D)
No. Process Name
7700 PFT UP LMT POS (STD)
7701 PFT P-BUCKLE (STD)
7702 PFT P-F TIMING (STD)
7703 PFT AST ON/OFF (STD)
7704 PFT AST START (STD)
7705 PFT AST END (STD)
7706 TR1 LONG-P BKL (STD)
7707 TRAY1 P-F TMG (STD)
7708 TR1 AST ON/OFF (STD)
7709 TR1 AST START (STD)
7710 TR1 AST END (STD)
7711 TR2 LONG-P BKL (STD)
7712 TRAY2 P-F TMG (STD)
7713 TR2 AST ON/OFF (STD)
7714 TR2 AST START (STD)
7715 TR2 AST END (STD)
7716 TR3 LONG-P BKL (STD)
7717 TRAY3 P-F TMG (STD)
7718 TR3 AST ON/OFF (STD)
7719 TR3 AST START (STD)
7720 TR3 AST END (STD)
7721 RE-FEED P-BKL (STD)
FD EJECT SPEED
7728
COMPENSATION (STD)
RE-FEED ARRIVAL TIMING
7729
(NORMAL LONG PAPER)
7730 BELT SPD RATIO (STD)
7731 HEAD GAP (STD)
7732 VERTICAL POS 1 (STD)
7733 VERTICAL POS 2 (STD)
CIS SIDE MASK MODE
7734
(STD)
7735 FD S-FNC OFFST (STD)
RE-FEED ARRIVAL TIMING
7736
(NORMAL SHORT PAPER)
7737 WING OFFSET (STD)
7738 FU EJ ROLL SPD (STD)
7739 AS S-FNC OFFST (STD)
7740 AS E-FNC OFFST (STD)
ComColor Unit (Series 7000)
Default Unit/Range
Specifi es the upper limit position of the paper feed tray.
1
0: Top 1: Middle 2: Bottom
3 (-10 - 20)mm
0 (-30 - 30)mm
0: OFF
1
1: ON
0 (-100 - 100)ms
0 (-100 - 100)ms
3 (-10 - 20)mm
0 (-100 - 100)ms
0: OFF
1
1: ON
1 (-100 - 100)ms
0 0-200ms
4 (-10 - 20)mm
0 (-100 - 100)ms
0: OFF
1
1: ON
1 (-100 - 100)ms
0 0-200ms
3 (-10 - 20)mm
0 (-100 - 100)ms
0: OFF
1
1: ON
1 (-100 - 100)ms
0 0-200ms
6 0-20mm
0 (-300 - 300)mm/s Compensates the FD ejection speed.
20 (-50 - 50)ms
1000 950-1020
Specifi es the head gap.
0
0: Standard 1: Card 2: Envelopes 1 3: Envelopes 2
0 (-20 - 20)mm
0 (-20 - 20)mm
0: Inactive
1
1: Active
60 (-500 - 500)
4 (-50 - 50)ms
(-500) (-500 - 500)
850 177-1500mm/s
(-40) (-200 - 400)
0 (-300 - 300)
[ 16-53 ]
Description
Specifi es the amount of slackness in external paper feeding.
Adjusts the timing of external paper feed motor deactivation.
Adjusts the timing of external paper feed motor activation.
Changes the activation timing of the external paper feed
motor relative to the timing of registration motor startup.
The interval between external paper feed motor activation
and deactivation is not changed.
Specifi es whether assist control is executed when paper is
transferred from external paper feeding.
Specifi es the time when external paper feed assist is
started.
Specifi es the time when external paper feed assist is
fi nished.
Specifi es the amount of slackness when long paper is
transferred from tray 1.
Specifi es the timing when paper transfer starts from tray 1.
Specifi es whether assist control is executed when paper is
transferred from tray 1.
Specifi es the time when tray 1 assist is started.
Specifi es the time when tray 1 assist is fi nished.
Specifi es the amount of slackness when long paper is
transferred from tray 2.
Specifi es the timing when paper transfer starts from tray 2.
Specifi es whether assist control is executed when paper is
transferred from tray 2.
Specifi es the time when tray 2 assist is started.
Specifi es the time when tray 2 assist is fi nished.
Specifi es the amount of slackness when long paper is
transferred from tray 3.
Specifi es the timing when paper transfer starts from tray 3.
Specifi es whether assist control is executed when paper is
transferred from tray 3.
Specifi es the time when tray 3 assist is started.
Specifi es the time when tray 3 assist is fi nished.
Specifi es the amount of slackness in re-feeding.
Compensates the re-feed paper arrival timing. (Normal long
paper = 356 mm or longer.)
Specifi es the belt speed ratio.
This is the transfer belt speed ratio relative to a registration
roller speed of 1. (1=0.1%)
Adjusts secondary scanning position 1.
Adjusts secondary scanning position 2.
Activate or Inactivate the CIS on the side registration unit
to check the paper width for the Side Margin and Image
Centering.
<Paper Feed Control = Standard Paper >
Adjusts the FD paper ejection fence offset. (1=0.1ms)
Compensates the re-feed paper arrival timing. (Normal short
paper = 355 mm or shorter.)
Adjusts the FU paper ejection wing offset. (1=0.1ms)
Adjusts the FD paper ejection roller speed.
Adjusts the side paper guide offset of the auto control
stacking tray. (1=0.1ms)
Adjusts the end paper guide offset of the auto control
stacking tray. (1=0.1ms)
Test Modes
Rev.1.00